效果器 / 插件

 | 

FabFilter Totalbundle 15-2-2018 Win Vst3 & Vst x86 ...  ( 43 )
123下一页
-  第 1 页  -
wsdgyd
2068

Vst3 / Vst |x86 x64 | 194 MB
The Total Bundle is a set of all FabFilter plug-ins. With this bundle, you get our professional EQ, reverb, compressor, multiband dynamics, limiter, de-esser and gate/expander, creative multiband distortion, delay, filter and synthesizer plug-ins.

Change log 12 02 2018:

All plug-ins:

Fixed possible crashes in Logic Pro X, which occasionally tries to initialize plug-ins with invalid/uninitialized buffers.
Fixed possible crash in Nuendo 7 on macOS when closing a plugin.
Fixed issues with key stroke stealing on Windows when using the Avid S6 control surface.
Fixed incorrect appearance of plug-in interfaces in Live 10 in High DPI mode.
The VST 2.4 plug-in will now automatically adapt its channel layout to match the audio/track it is placed on. Note that the separate "(Mono)" version of the plug-ins are still included for backwards compatibility.
Fixed a bug that could cause a crash when moving the mouse over the right edge of a menu with icons.
Small bug fixes and improvements.

Pro-Q 2:

Fixed an issue with Natural Phase mode, which could sporadically lead to an incorrect filter frequency response when processing audio at very small block sizes.
Fixed a bug which caused Permanent Spectrum Grab in Pro-Q 2 to disappear when the input of the VST3 plug-in became silent.
Fixed a bug that caused the spectrum analyzer to slow down when moving the mouse over the EQ display, with graphics acceleration disabled.
Sample rate information is now included when saving an EQ Match spectrum, so it can be restored correctly when using a different sample rate.
In EQ Match, the 'Save Input as Reference' option now checks whether the plug-in is receiving audio on the input.
Fixed a bug that caused the colors of EQ bands 9 to 24 not to match with the highlight coloring around the floating band controls.
Fixed a small bug when right-clicking the solo button in the EQ parameter value display: this would cause the button to remain in the down state.

Pro-L 2:

Slightly changed the true peak detection algorithm to produce possible small overreads equal to the ITU-R BS.1770-4 example algorithm, while still minimizing true peak underread. This makes Pro-L 2 easier to use in combination with MFIT (Mastered for iTunes) tools like AURoundTrip.
Fixed a small bug that could cause the True Peak level to display in orange in some cases, while it should still show in green.
Fixed a bug that would cause the Integrated level to reset to -INF after a bounce in Logic Pro X (and some other DAWs as well). From now on, the Integrated level is now only reset by clicking the 'Reset' button in the Loudness panel in the interface.
Fixed a small issue that could cause an incorrect order of 'M', 'S' and 'I' labeling under the three loudness meters.
Fixed an issue that caused Pro-L 2 to seem bypassed when used on tracks with only a center channel in Cubase.
Fixed a bug that caused Pro-L 2 to crash when adding the plug-in to a 4-channel track in Reaper when using the Compact interface mode.

Other plug-ins:

Pro-G: Fixed possible crash on Windows when using 150% scaling (High DPI).
Pro-MB: Fixed a bug that could cause the output to become silent in some rare occasions, when using 4x oversampling.

The updated plug-ins are fully compatible with previous versions.
home pagehttps://www.fabfilter.com/

评分

参与人数 1 申请加分 收起 理由
电脑音乐迷
伊拉拉塔lala
8403
沙发
三松子
1165
板凳
hanshuzhiwang
548
新年快乐
阿良10000
2055
谢谢
leeaa
131
好棒,感谢
shiyufeng
1218
本帖最后由 shiyufeng 于 18-2-21 11:33 编辑

修正了逻辑Pro X的可能崩溃,它偶尔尝试用无效/未初始化的缓冲区初始化插件。

修正了在macOS上的Nuendo 7关闭插件时可能发生的崩溃。

修正了在使用S6控制表面时,在Windows上的按键动作。

在高DPI模式下,在Live 10中固定不正确的插件接口外观。

VST 2.4插件现在将自动调整它的通道布局,以匹配它被放置的音频/跟踪。请注意,插件的“(Mono)”版本仍然包含在向后兼容性中。

修正了当鼠标移动到菜单右边的图标时可能导致崩溃的错误。

小错误修复和改进。
Pro-Q 2:
修正了自然相位模式的问题,在处理音频时,会偶尔导致错误的滤波器频率响应。

修正了当VST3插件的输入变得沉默时,导致支持q2的永久频谱抓取消失的错误。

修正了当移动鼠标在EQ显示器上移动时,导致频谱分析仪慢下来的错误,图形加速被禁用。

在保存EQ匹配光谱时,现在包括了采样率信息,以便在使用不同的采样率时能够正确地恢复。

在EQ Match中,“保存输入作为参考”选项现在检查插件是否在输入中接收音频。

修正了导致EQ波段9到24的颜色不匹配浮动带控件的突出颜色的错误。

修正了在EQ参数值显示中右键单击solo按钮时的一个小错误:这将导致按钮保持在down状态。
Pro-L 2:
稍微改变了真正的峰值检测算法,产生了与ITU-R bs1770 -4示例算法相同的小的超读,同时仍然将真正的峰值低估最小化。这使得Pro-L 2更容易与MFIT (iTunes)工具结合使用,比如AURoundTrip。

修正了一个小错误,可能会导致真正的峰值水平在某些情况下显示在橙色,而它仍然应该显示在绿色。

修正了一个错误,它会导致集成级别重置为-INF,在逻辑支持X(和其他一些DAWs)的反弹之后。从现在开始,只需点击界面上响度面板中的“重置”按钮,就可以重置集成级别。

修正了一个小问题,可能导致错误的“M”、“S”和“I”在三个响度表下的标记。

修正了在Cubase中仅使用一个中心通道时,导致Pro-L 2被忽略的问题。

修正了在使用紧凑的界面模式时,在Reaper中添加插件到4通道轨道时导致Pro-L 2崩溃的错误。
其他插件:
Pro-G:在使用150%缩放(High DPI)时,在Windows上固定可能的崩溃。

Pro-MB:修正了在某些情况下,当使用4x超采样时,可能导致输出变得沉默的错误。
ESTOU
143
这个效果器好用吗?
HadesYeve
4606
不错

感谢楼主提供分享!谢谢!!
trymeandy
1024
最牛逼的效果器之一。必装神器。
哪位有度娘盘?
鲜桃仁
1691
好东西
QWER01
15
dcwdcw1
773
谢谢分享!
东风5
1499
没有aax,有啥用?
cofain
102
有mac 吗
您需要登录后才可以回帖 登录 | 注册

本版积分规则

录音/制作/创作

吉他

 

扩声技术

视频技术

作品展示

生活

信息

其它

音频应用专卖店

主题数: 323202, 帖子数: 3115774,  会员人数:           全部热门       精华       新闻       教程